Petrol: diesel Consumption: 8-10liter/hour Capacity: to cremate (carrion and spoils) 350-400kg/hour Temperature: 900-1350?C Operation temperature: -30~40?C Incinerator weight: 1800-2000 kg Volume: 0.70-0.80m/cube Exterior dimension: 1.4-1.6*1.0-1.15m (L*W) An incinerator represents a complete solution to the problem of disposal of all hospital waste types. The liquid fuel
is diesel. The...
The publications listed below form a part of this specification to the extent referenced. The publications are referenced in the text by basic designation only.
A1) Technical Specification:
Incinerators
All types of diesel fired incinerators suitable for HCW may be offered as long as they can
safely treat medical waste. The equipment should be compliant with all requirements for
installation in Kenya. All components for installation must be...
Piping and stack connection locations and sizes. Technical data including temperature rating and arrangement of refractory and insulation. Weights of unit and loading diagram of foundation. Evidence that contractor has coordinated support requirements with foundation design.
Recommended anchorage to foundation. Seismic requirements apply. Submit calculations by professional engineer. Predicted external surface...
* Burner with fuel, mono-bloc casting guiding type with horizontal flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* A secondary injection of air to ensure perfect oxygen content.
19. A control box ensuring the complete cycle of combustion.
20. Fan:
* Electro-ventilator distributing the secondary air, the regulation of the...
Key Features:
— Full range incinerator with Economized Small Scale incinerator,
Standard Small-Large Scale incinerator, General Municipal Solid Waste Incinerator,
Pet and Animal Cremation, Containerized Mobile Incinerator, High Efficient Environmental Waste Incinerator.
— Single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators.
— System solutions for...
Waste Heater Design TS150 PLC, Review This design is small-scale waste incineration tools for tiny waste end result. Construction is dual/double combustion chamber with 02 sets oil burner, batch load
incineration equipment. Waste feed chamber is 1570Liters (1.57m3, TS150 PLC).
Primary & Secondary combustion chambers and smoke filter chamber.
Batch load on the bottom of chamber. Incinerator PLC panel control suit for local...
The incinerator shall be equipped with a Diesel oil tank that will be supplied with DO from our DO tank located in the
power station. The tank shall be equipped with level switches and appropriate solenoid valves for automatic filling of
the tank. The tank shall also be equipped with a magnetic level indicator, level switches and appropriate drain valves,
separate overflow and vent pipes.
Oil-fired multi-stage waste incinerator of pyrolytic type...
Burner Design TS250 PLC, Review
This design is small waste incineration tools for little waste result. Construction is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment.
Waste feed chamber is 1800Liters (1.8m3, TS250 PLC). Primary & Secondary combustion chambers
and smoke filter chamber. Batch load on the bottom of chamber. Incinerator PLC panel control suit for local operation. Key...