Category: Waste Incinerators

We are looking for small incinerators with filter (with least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr, 20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any kind (including hospital wastes) per day or per hour. Should it be with no smoke, no fumes, no odour (smell), no dust, no emission of solid particles and with least minimum pollution (within national and international...

HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project. We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction with medical...

1.Solidifier (Fluid waste disposal product)   Liquid Waste Solidifier for Water Based Special Features of Solidifier 2lb bottle Effectively solidifies potentially serious infectious waste quickly Quickly8 penetrates to solidify blood and body fluid to convert Gels in seconds No shaking required Retrains solidity to prevent spills and leaks for safe and easy bagging and easy transport to disposal. Concentrated formula: one...

Physical /Chemical Characteristics: Boiling Point (_F) :  N/A                     Appearance & Odor: Off white, odorless Vapor Pressure(mm Hg): N/A        Volatiles (% by weight): N/A Vapor Density (Air =1) :N/A         Evaporation Rate )n-butylacetate=1): N/A HMIS...

combustion chamber and one flue gas afterburning chamber. The incinerator must be able to meet the following parameters:   1.Treatment capacity of: a) 50 kg waste per hour.   2.Temperature: Main combustion chamber up to 850°C, and in the second chamber > = 1,100 °C   3.Retention Time: 2 seconds in the second chamber   The furnace (including secondary combustion chambers etc.) dimensions must be large enough to provide...

Manual autoclave with vertical loading; gravity displacement type with possibility for Vacuum.   Capacity:      Up to 12 kg/h   Chamber size:      >150 liters   Material:       Stainless steel   Temperature:       134 °C   Further information:   Minimum autoclave chamber size shall be 150 liters and...

The manufacturer must provide a declaration that the pressure vessel is manufactured in accordance with relevant guidelines for pressure equipment.   Following accompanying documents should be supplied with the treatment system and shall be available at the Site:   1.Operation instructions (including process description). 2.Loading and maintenance procedures. 3.Short-form of operation and loading procedures. 4.P&I diagram,...

Incinerate: medical waste and general waste Capacity to burn waste: 400 — 500 kg/hr Fuel: Diesel Fuel Consumption: 10 litres/hr maximum Incineration temperature: 950 – 1300 °c Casing: thick (min 5 mm) Stainless steel casing and fully insulated to withstand sea humidity Voltage: 220/240 V or 380/415V Frequency: 50 Hz Feeding: automatic Ash 1 leftovers removal: Automatic Fuel gas filtration system: Yes Warranty: 12 months Staff training:...

Operational Capabilities   PROCESS MINIMUM 1 TON PER DAY OPERATED WITH LIMITED TRAINING REGULAR MAINTENANCE CAN BE COMPLETED WITH LIMITED TRAINING COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS ABILITY TO BURN WASTE LUBRICANTS (POL) HANDLE ORGANIC SOLIDS (TO INCLUDE RMW) DEPLOYABLE MOBILE 24 HRS OF CONTINUOUS USE AUTOMATIC LOADING SYSTEM AUTOMATED ASH REMOVAL SYSTEM GAS SCRUBBING SYSTEM 95% REDUCTION OF SOLID WASTE OPERATE OFF DIESEL OR...

Capacité destructive de 55 Kg/h jour de déchets hospitaliers  avec un p?.c. i jusqu’à 3.200 Kcal/Kg 1)Type de déchet hospitalier 2)Pouvoir calorifique...