Waste calorific worth: 4000KCAL/KG
Moisture Web content: 10-25%.
Small Ability: 50Kg/Hour set load.
Additional Chamber: 2 Secs @ 850degrees C
The main burning chamber must make certain very little separation temperature degree is not much less than 850 degrees C.
INSULATION.
Calcium Silicate.
Restricting Constant solution restriction 1000 degrees C.
Density 25mm
THROUGHPUT.
50kg/hour at a tiny calorific worth of 4,000 kcal/kg as well as an...
Technical Specifications of External SHREDDER Controls: Pre-programmed PLC controlled
Password activated and reversal history indication
Motor starter with overload protection
Automatic instantaneous stop on hard object in shredder bed
Automatic heavy cutting load reversal and re-try , up to three times
Control housing Nema type 12
Cutting Hardwires: Chamber Dimensions(WxLxH): approx 33 c m x 38 cm x 25cm
Number of knives: Approx 18 or to...
Primary chamber – Consists of a monolithic high grade refractory concrete with high grade insulation backing, . Utilising a refractory hearth or equivalent for continuous ash removal.
Secondary Chamber – Consists of high density, low thermal mass refractory ceramic fibre with an innovative low emissivity protective coating. bio medical waste treatment plant ( Incineration )with panel.
SOLID WASTE INCINERATOR Feeding...
Major components are – Ethanol, Paraffin, Silicon, Aluminium chloro hydrate, Bentone ,LPG
quote for incinerators for industrial chemical wastes treatment,
1 burning rate must be Average 30kgs/h
2 inside of chamber material must be refractory concrete cement
3 it works in three system diesel oil/ Natural gas or LPG
4 voltage must be 220V
5 inside temperature first must be 1000c and second must be 1200c
6 pipe length must be 20 M
Our...
Stack:
Type: Wire Supported
MOC: Mild Steel of ISstd
Height :3 Meters or more
• PROCESS AT LEAST 1 METRIC TON OF WASTE PER DAY
• OPERABLE BY 1 PERSON, WITH NO TRAINING REQUIRED
• REGULAR MAINTENANCE CAN BE COMPLETED BY 1 PERSON WITH LIMITED TRAINING
• REGULAR MAINTENANCE SHOULD NOT EXCEED 1-HOUR PER DAY
• COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS
• ABILITY TO INCINERATE WASTE PETROLEUM, OILS, AND LUBRICANTS
•...
CONTAINERIZED BURNER FOR INCINERATING HAZARDOUS AND NON HAZARDOUS WASTES (BOTH DOMESTIC In Addition To INDUSTRIAL) AT A MINIMUM COST OF 300KG/HR WITH THE ABIDING BY DEMANDS:
Ø PRIMARY CHAMBER VOLUME 7.2 M ³
Ø BURNING CAPABILITY 300Kgs/hr.
Ø PRIMARY CHAMBER TEMPERATURE LEVEL 850 ⁰ C AND ALSO SECONDARY CHAMBER TEMPERATURE LEVEL 1100 ⁰ C
Ø REFRACTORY THICKNESS 225MM; REFRACTORY WITHSTAND TEMPERATURE 1400 ⁰ C
Ø RAM LOADER CAPACITY 0.75...
the incinerator can be made use of to do away with Clinical waste IV, used needles, utilized syringes, scalpels, made use of dressing product, private security gadgets like gown, gloves and so on truncated body components, excreta from clients and also various other research laboratory waste.incineration tools that can deal with a mix of clinical as well as contaminateds materials. The professional wastes contain (yet are not restricted to)...