“PYROLYTIC” combustion, by controlling the gasification of waste
The incinerator manufacturer must avoid the release of black smoke and fine dust, during the loadings.
It shall be able to reduce the volume of wastes by 98%.
It shall be able to hold emission in the second burn with gas residence of not less than 2 seconds.
The incineration should be completely free from visible smoke as well as offensive odours.
1.0The primary ignition...
The incinerator to be fully assembled wired and logic function tested in the factory, prior to dispatch.
– One high flue gas temperature indicator/alarm to provide an audio/visual warning in the event of high flue gas
temperatures occurring in two stages:-
First stage audible alarm, second stage incinerator shutdown, with one voltage free contact for connection to a
remote alarm...
This equipment quality structural for kinds of site, like hospital, environmental department,
animal cremation agencies, etc.
HICLOVER Incinerator supply updated models with dual combustion chamber,
mix-combustion chamber and smoke filter
chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C. Tools Technical Specifications Version YD-10C Image Feed Capability Common 40 kgs per feed...
Incinerator Model A1500, Intro
This design is big-scale pet cremation tools for huge pets. Construction is dual/double combustion chamber with 03 units oil/gas burner,
batch load incineration equipment. Animal feed chamber is 1500Liters (Model: A1500).
Primary & Secondary combustion chambers and included mix-combustion chamber,
smoke filter chamber with firebrick and Refractory Concrete chamber. Batch load on
the...
Animal Crematory Burner
Ability: Normal 80kgs per feeding Thing Spec Layout A900 Interior Measurements 120 x 90 x 85 CM Match for Family Pet Feline – – – – yes – Family pet – yes Pig – – small Cow – – no Key Product Checklist Key Burning Chamber Additional Burning Chamber Mix-Combustion Chamber Smoke Filter Chamber Burner Control Instance Smokeshaft:5.0 Meters
*( upgrade to Stainless-steel, free cost) Italy oil/gas burner:...
This model is small-scale waste incineration equipment for small waste output.
Construction is dual/double combustion chamber with 02 units oil/gas burner.
Waste feed chamber is around 900Liters (0.9m3, YD-50). Primary & Secondary
combustion chambers and included mix-combustion chamber. Waste load on the
bottom of chamber. Incinerator panel control suit for local operation. Design YD-50 with wet scrubber Photo...
The burners shall comply with the requirements of BS 799 or DIN Standards. Each shall be the packed type and
incorporate automatic stop/start programmed timer control, flame failure equipment and ignition failure equipment to
close off the fuel supply in the event of malfunction.
Each burner shall be designed and mounted for ease of access and so that they may be fully maintained from outside the combustion chamber. The burners shall be...
The incinerator plant shall incorporate a control panel for its operation. On the control panel we shall have a visual
display of the chamber temperatures. This visual display must control and monitor the incinerator and his performance.
Capacity of destruction in weight shall be 60 Kg/h.
It should be able to operate not less than 10 hours/day
This incinerator must be able to destruct all combustible wastes produced by hospitals, private...
Incinerator Variation CA100, Summary
100Kg/Hour Burning price with Secondary burning Capability This design is tiny medical waste incineration gadgets. Building and building is dual/double combustion chamber with 02 units oil burner, batch load incineration equipment. Animal feed
chamber is 560Liters (Model CA100). Primary & Secondary combustion chambers and smoke
filter chamber with firebrick and refractory concrete...