All particles of the waste should achieve a high level of sterilization and not just “disinfection” due to the
continuous agitations
Description of the Treatment Cycle of the processor i) Loading * The waste has to be loaded by dropping bagged and or boxed waste into the open loading door on the vessel.
* The loading door should be mounted at an angle on time top side, of the vessel with suitably sized to accommodate the
infectious wastes...
HICLOVER incinerator exert the advantages and discard the disadvantages of the same kind of equipment at domestic and abroad. It is an unique and international advanced medical waste incineration equipment. The equipment is small size, high efficiency, reasonable process, leading technologies and a high harmless degree, ideal garbage treatment equipment for hospital, laboratory, hotel, station, etc. Items/Model TS100( PLC) Image Principle...
Containerized Incinerator is one type of mobile incinerator. we build the incinerator and mounted the incinerator into shipping container(20′ container or 40′ container), with necessary Basic work, such as flooring, lighting, wiring, etc. Items/Model CA30 Image Shed Rate Common 10 kg/hour Feed Capability Average 30kg per feeding Control Establishing PLC( Programmable Reasoning Controller Burner) Combustion Chamber 330L Internal Measurements...
Medical Waste Shredder
Capacity: Should be 150 liters.
Should be capable to shred up to 100 liters of the treated waste.
7
The technology should be capable to treat hospital waste including sharps like needles,
lancets, scalpels and soft materials like bandages.
Must render the waste to be unrecognizable.
Following accompanying documents must be supplied with the treatment system and shall
be available at the Site:...
Petrol: diesel Consumption: 8-10liter/hour Capacity: to cremate (carrion and spoils) 350-400kg/hour Temperature: 900-1350?C Operation temperature: -30~40?C Incinerator weight: 1800-2000 kg Volume: 0.70-0.80m/cube Exterior dimension: 1.4-1.6*1.0-1.15m (L*W) An incinerator represents a complete solution to the problem of disposal of all hospital waste types. The liquid fuel
is diesel. The...
The publications listed below form a part of this specification to the extent referenced. The publications are referenced in the text by basic designation only.
A1) Technical Specification:
Incinerators
All types of diesel fired incinerators suitable for HCW may be offered as long as they can
safely treat medical waste. The equipment should be compliant with all requirements for
installation in Kenya. All components for installation must be...
Piping and stack connection locations and sizes. Technical data including temperature rating and arrangement of refractory and insulation. Weights of unit and loading diagram of foundation. Evidence that contractor has coordinated support requirements with foundation design.
Recommended anchorage to foundation. Seismic requirements apply. Submit calculations by professional engineer. Predicted external surface...
* Burner with fuel, mono-bloc casting guiding type with horizontal flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* A secondary injection of air to ensure perfect oxygen content.
19. A control box ensuring the complete cycle of combustion.
20. Fan:
* Electro-ventilator distributing the secondary air, the regulation of the...